
功能与特点: Function and characteristic:
◆ 法国施耐德原装进口双伺服驱动,精度准确,机械传动部分减少,可有效减少机械的故障率。
◆ 威纶触摸屏操作,参数(钉距,钉数,钉种,后挡板)变换方便快捷。
◆ 整个控制系统采用欧姆龙PLC控制系统。
◆ 后电动挡板,采用步进马达驱动,尺寸准确,变换尺寸更方便快捷。
◆ 控制箱内全接触器采用士林品牌。
◆ 光电和接近开关采用欧姆龙品牌。
◆ 底模,刀片采用日本钨钢制作(耐磨)。
◆ 整组钉头全部采用特殊钢制作,电脑锣精密加工。
◆ 可钉单钉/,双钉//,加强钉(// / / //两头是双钉中间部分为单钉)一次性完成,能适合不同客户对钉种的不同要求。
◆ 变换纸箱尺寸和调节纸箱钉距只需一分钟就可完成,大大节省时间操作方便。
◆ 可钉有盖箱&无盖纸箱(有无盖箱要钉的情况下在订购机械时须说明)。
◆ 前端送纸部自动计数,送纸台设有光电感应装置,送纸时自动上升。
◆ 后段有自动计数功能,做好的成品张数可按设定数量(1-99)分叠送至输送机械末端,方便打包捆扎。
◆ 机械速度:600钉/分钟。
◆ 钉距:30-120mm任意可调。
◆ 压纸胶轮间隙电动调整。
◆ 工作台升降有效高度:900mm。
◆ 机器占地尺寸: 主机2.8x2.7x2米。
◆ 机器重量:1.8T。
◆ 整机订单式调整,可储存1000个订单。
◆ 整机隔离变压器保护装置。
◆ France Schneider imported double servo drive, precision accuracy,
reducing the mechanical transmission parts, which can effectively
reduce the failure rate of the machinery.
◆ Weinview touch screen operation parameter (distance, nail, nail, nail, a
rear baffle plate number, convenient and quick transformation) .
◆ The whole control system adopts OMRON PLC control system.
◆ After the electric baffle, using step motor drive, the size is accurate, the
transform size more convenient.
◆ The control box is full contactor adopts Shilin brand.
◆ The photoelectric and proximity switches using the OMRON brand.
◆ The bottom mold, wolfram steel blade used in Japan (Nai Mo) .
◆ The entire set of nail head all adopt the special steel manufacturing,
computer gongs precision machining.
◆ It can nail nail / / / single,double screw,strengthening the nail ( // / / // two
double nail in the middle part of single screw) once completed,can be
suitable for different customer requirements of different kinds of nail.
◆ The transform carton size and adjusting nail carton from just one minute
can be completed, greatly saves time and is convenient to operate.
◆ It can nail a lid box & carton no cover ( no cover box to nail in the case
of ordering machinery must be noted when).
◆ The front end to send automatic counting paper, paper feeding platform
is provided with the photoelectric induction device, automatic rising
feeder.
◆ The following section has the function of automatic counting, finished
cartons can be set according to the number (1-99) sub stack sent to the
conveying machinery terminal, convenient bunding.
◆ The machine speed:600 nails per minute.
◆ The nail spacing: 30-120mm adjustable.
◆ The paper pressing wheel gap electric adjustment.
◆ The working table lifting effective height:900mm.
◆ The machine covers an area of size: host 2.8x2.7x2 meters.
◆ The machine weight: 1.8T.
◆ The whole order adjustment, can store 1000 orders.
◆ The whole machine electrical isolation transformer protection device
主要配置: Main configuration:
名称 Name | 品牌 | Brand | 产地 | Origin |
机头伺服电机 Nailing servo motor | 施耐德 | Schneider | 法国 | French |
送纸伺服电机 Freeding servo motor | 施耐德 | Schneider | 法国 | French |
PLC、光电开关及接近开关 PLC, photoelectric switch, and proximity switch | 欧姆龙 | Omron | 日本 | Japan |
接触器、断路器 Contactor, circuit breaker | 士林 | Shilin | 台湾 | Tawan |
机头减速机 reducer | 利明 | LIMing | 台湾 | Tawan |
中间继电器 lntermediate relay | 施耐德 | Schneider | 法国 | French |
钉头整组 Nail head |
|
| 日本模具钢 | Japan |
气缸、电磁阀 Cylinder, solenoid valve | 亚德克 | Airtac | 台湾 | Tawan |
触摸屏 Touch screen | 威纶 | Weinview | 台湾 | Tawan |
刀片 The blade |
|
| 日本合金钨钢制作 | Japan |
底模 Bottom die |
|
| 日本合金钨钢制作 | Japan |
齿轮减速机 The gear reducer | 欧特或中大 | OTT/ZD | 上海 | Shanghai |
蜗轮蜗杆减速机 Worm gear and worm reducer | 真誉 | ZHENYU | 杭州 | Hangzhou |
轴承 bearing | 人本 | C&U | 江苏 | Jiangsu |
同步轮、同步带 Synchronous wheel, synchronous belt | 欧异特 |
| 德国 | Germany |
技术参数 Technique parameter:
最大尺寸(A+B)×2 | MAX (A+B)×2 | 3500mm |
最小尺寸(A+B)×2 | MIN (A+B)×2 | 740mm |
最大尺寸(C+D+C) | MAX(C+D+C) | 3500mm |
最小尺寸(C+D+C) | MIN(C+D+C) | 250mm |
最小摇盖C | MIN rock cover C | 50mm |
最大摇盖C | MAX rock cover C | 560 mm |
最大宽度B | MAX widt B | 760 mm |
最小宽度B | MIN widt B | 120 mm |
最大长度A | MAX length A | 1140 mm |
最小长度 | MIN length A | 250 mm |
最大高度D | MAX height D | 2000 mm |
最小高度D | MIN height D | 150 mm |
最大钉舌宽度E | MAX width of the tongue E | 40 mm |
最大给纸高度 | MAX hignt of feeder | 900 mm |
机械宽度 | Width | 2850 mm |
机械重量(T) | Weight(T) | 1.8 |
机械速度(钉/分钟) | Speed | 600 |
订数 | Number of Stitching | 1-99 |