
功能与特点: Function and characteristic:
◆ 法国施耐德原装进口四伺服驱动,精度准确,机械传动部位减少,可有效减少机械故障率。
◆ 整个控制系统采用欧姆龙PLC控制系统。
◆ 控制箱内接触器全部采用士林品牌。
◆ 底模,刀片采用日本钨钢制作(耐磨)。
◆ 整组钉头全部采用特殊钢制作,电脑数控精密加工。
◆ 变换纸箱尺寸和调节纸箱钉距只需一分钟就可完成,大大节省时间操作方便。
◆ 可钉有盖箱&无盖纸箱(有无盖箱要钉的情况下在订购机械时须说明)。
◆ 后段有自动计数功能,做好的成品张数可按设定数量(1-99)分叠送至输送机械末端,方便打包捆札。
◆ 一台两用,可钉单片接钉纸箱,双片接钉纸箱,不规则纸箱。
◆ 尺寸采用全电动式制控制,变换尺寸只需2-3分钟。
◆ 可钉加强钉,单钉,双排钉,加强钉,一次性完成。
◆ 送纸部自动计数,成品送出捆扎。
◆ 适用于中小型纸箱、装钉快速而省力。
◆ 调整钉距,使用电脑设定自动调钉距,钉距为20-120mm任意可调。
◆ 有底无盖的纸箱也可以钉。(特殊说明)。
◆ 适合瓦楞纸三层、五层、七层(七层时需要特殊说明)。
◆ 本机采用四个伺服电机(两个机头电机和两个控制钉距电机)。
◆ 整机订单调整(选配)。
◆ France Schneider imported four servo drive,precision accuracy,reducing
the mechanical transmission part,which can effectively reduce the
failure rate of the machinery.
◆ The whole control system adopts OMRON PLC control system.
◆ The control box is full contactor adopts Shilin brand.
◆ The bottom mold, wolfram steel blade used in Japan (Nai Mo).
◆ The entire set of nail head all adopt the special steel manufacturing,
CNC precision machining.
◆ The transform carton size and adjusting nail carton from just one minute
can be completed,greatly saves time and is convenient to operate.
◆ It can nail a lid box &carton no cover(no cover box to nail in the case of
ordering machinery must be noted when).
◆ The rear section with automatic counting function, finished cartons can
be set according to the number (1-99) sub stack sent to the conveying
machinery terminal, convenient bundling.
◆ A dual purpose, can nail a monolithic ground nail carton,twin sheet nail
carton, irregular box.
◆ The size with full electric control, transform size only 2-3minutes.
◆ It can strengthen the nail nails, single nail, double row nail, a complete.
◆ We send automatic counting paper, finished sending strapping.
◆ It is suitable for small and medium sized carton binding, rapid and
lagor-saving.
◆ The adjusting nail spacing, the use of computers set up automatic
adjusting nail spacing, nail spacing 20-120mm adjustable;
◆ The machine adopts computer screen displays the fault description.
◆ The bottom without a cover carton also can nail (special instructions).
◆ The application of corrugated cardboard three layer, five layer, seven
layer (layer seven required special instructions)
◆ The machine adopts four servo motors (i. e. two head motor and two
control screw pitch motor).
◆ The machine adjustment (optional).
主要配置: Main configuration:
名称 Name | 品牌 | Brand | 产地 | Origin |
机头伺服电机 Nailing servo motor | 施耐德 | Schneider | 法国 | French |
送纸伺服电机 Freeding servo motor | 施耐德 | Schneider | 法国 | French |
PLC、光电开关及接近开关 PLC, photoelectric switch, and proximity switch | 欧姆龙 | Omron | 日本 | Japan |
接触器、断路器 Contactor, circuit breaker | 士林 | Shilin | 台湾 | Tawan |
机头减速机 reducer | 利明 | LIMing | 台湾 | Tawan |
中间继电器 lntermediate relay | 施耐德 | Schneider | 法国 | French |
钉头整组 Nail head |
|
| 日本模具钢 | Japan |
气缸、电磁阀 Cylinder, solenoid valve | 亚德克 | Airtac | 台湾 | Tawan |
触摸屏 Touch screen | 威纶 | Weinview | 台湾 | Tawan |
刀片 The blade |
|
| 日本合金钨钢制作 | Japan |
底模 Bottom die |
|
| 日本合金钨钢制作 | Japan |
齿轮减速机 The gear reducer | 欧特或中大 | OTT/ZD | 上海 | Shanghai |
蜗轮蜗杆减速机 Worm gear and worm reducer | 真誉 | ZHENYU | 杭州 | Hangzhou |
轴承 bearing | 人本 | C&U | 江苏 | Jiangsu |
同步轮、同步带 Synchronous wheel, synchronous belt | 欧异特 |
| 德国 | Germany |
技术参数 Technique parameter:
型号及参数 Model | SDJ-2000 | SDJ-2400 | SDJ-2700 | SDJ-3000 |
最大纸张尺寸(A+B)×2 Max.paper size (A+B)×2 | 4000 | 4800 | 5400 | 6000 |
最小纸张尺寸(A+B)×2 Min.paper size (A+B)×2 | 1060 | 1060 | 1060 | 1060 |
最大纸箱长(mm) Max. carton length | 2850 | 2850 | 2850 | 2850 |
最小纸箱长(mm) Min. carton length | 350 | 350 | 350 | 350 |
最大纸箱宽(mm) Max. carton width | 1000 | 1200 | 1350 | 1500 |
最小纸箱宽(mm) Min. carton width | 120 | 120 | 180 | 120 |
最大纸张高(C+D+C)(mm) Max. paper height | 2500 | 2500 | 2500 | 2500 |
最小纸张高(C+D+C)(mm) Min. paper height | 400 | 400 | 400 | 400 |
最大摇盖尺寸C(mm) Max. rock cover | 560 | 560 | 560 | 560 |
最小摇盖尺寸C(mm) Min. rock cover | 50 | 50 | 50 | 50 |
最大高度D(mm) Max.high | 2000 | 2000 | 2000 | 2000 |
最小高度D(mm) Min.high | 150 | 150 | 150 | 180 |
最大钉舌宽度(mm) Max. width of the tongue | 45 | 45 | 45 | 45 |
钉距(mm) Nailing From | 30-150 | 30-150 | 30-150 | 30-150 |
钉数 Number of Nails | 1-99 | 1-99 | 1-99 | 1-99 |
打钉速度(次/min) Stitching speed | 600 | 600 | 600 | 600 |
机器重量(T) weight | 2.5 | 3 | 3.5 | 4 |